The headphones are designed with soft silicone eartips. Adjustment of
the eartips and the headphones will ensure that optimal comfort and fit
is obtained.
See also Eartip Cleaning and Replacement.
When using the ds32a, the eartips should be pointed forward.
To adjust the eartip angles, grip the solid eartip shafts, as shown,
and rotate clockwise to the correct angle. Do NOT rotate
anti-clockwise. This may loosen the headphone assembly. Do not force.
This adjustment has been done at the factory and should not be
necessary when the ds32a is new.
Both eartips should be at the same angle, and the headphones
should be aligned symmetrically as shown, such that the eartips and
headphones are mirror images. This may require than the headphone arms
be pushed forward and back (one forward, the other back) as shown by
the arrows, to align the spring. This adjustment may be required from
time to time to maintain alignment and comfort.
![](/templates/thinklabs/images/2008_logo.jpg"){kind=logo}
Support and FAQs 
The headphones are designed with soft silicone eartips. Adjustment of
the eartips and the headphones will ensure that optimal comfort and fit
is obtained.
See also 
